TRANSAT

Transat Satellite Systems

Six Minute Satellite – 100% Australian

……………………………………………………………………..

transat satellite systems satellite gearbox australia Satellite Gearbox

This unit is a Hub for simple accurate alignment of satellite dishes that sets the elevation angle with a hand wheel adjustment and locks on with a handbrake lever. The unit is supplied ready for connecting to the main base plate of satellite dishes that attach the system to all generic mounting poles by replacing the existing U/bolt assemblies.

 

Image: Transat Gearbox

The Gearbox has been developed to take advantage of the obsolescence of Television satellite dishes that are being replaced by the NBN network and are not supplied with this system.

……………………………………………………………………..

Transat Tripod Systems

A vast improvement on existing Tripods due to the flexibility, rigidity and ease of setting up in permanent or temporary installations on rough or uneven surfaces and the height is adjustable simply by choosing the length of the tubing and provides alternative options to roof installations.

transat satellite systems transat tripod systems australia

BaileyCo_Transat_gearbox

All tripod equipment is available on request and is not included with the Transat Satellite Gearbox.

Installation, rigging to switch on status or dismantle for stowing, can be achieved in 6 minutes.

All accessories are available from your dealer.

 How to Rig Gearbox

1: Mount unit on pole.  2: Attach LNB arm   3: Attach dish

Setting Up The Gearbox

1: Loosen the hex screws 

2: Set the elevation 

3: Pan the dish to locate and peak the signal – lock in place with handbrake

4: Tighten all hex screws